JBL Model 5901 Universal Mic Input XFMR

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CJ

Well-known member
GDIY Supporter
Joined
Jun 3, 2004
Messages
15,652
Location
California
really a nice piece of iron, it was a joy unwinding 8060 turns of #45, but hey, i'm jus sayin,

jsdl5i.jpg


153kw03.jpg


the jaws of Death...

k0h8gm.jpg


 
xbde6g.jpg


off with the head>

34yw5g1.jpg


2l8ema9.jpg


this thing is built, check the drive pins, what a pain,

2v9vjad.jpg


sgigxw.jpg
       

i swear this stuff smells like plumbers putty,

2z9gys4.jpg


xo2og0.jpg


2naim85.jpg


2dj0yeu.jpg


34inyw1.jpg


34jbp60.jpg


26240ic.jpg


nzf1tv.jpg


11t03ud.jpg


ank4ns.jpg


24ynvhw.jpg


Lams:  24-25 EL - 80 Ni with Insulaze coating, .014 thick, square stack, 1 x 1 , 

Pri: 403 T #36 green wire,  L - 6.6 Henries  D: 1.43 DCR-31 Ohms  Start Pin 8 - Finish Pin 5

Cu Foil E Shield between pri and sec, soldered brn wire,

Sec: 8060 T #45 green wire, L-  2,400 Henries (est) D: .62 DCR - 2.8 K Ohms S - Pin 1 F -Pin  9

Turns Ratio - 1 : 20

Impedance Ratio; 1: 400

Input Impedance: 50 Ohms

Output Impedance: 20 K Ohms

 

Latest posts

Back
Top