Eh gang,
I found a company called JLI that sell a TSC-2 capsule made by Transound.
I have a couple of questions,
The first is that its made of copper and not brass.........is this something to be concerned about?
Also, it only has three wires // Two from both center fed screw on both sides and only one backplate wire on one of the backplates.
My circuit is like the Dani boards where by I need to have two backplate wires to the pcb.
I spoke with Brad the owner and he told me that the plates are electrically isolated so if this is the case, should I not be able to add a fourth wire to one of the free holes on the plate that does not have the wire?
I found a company called JLI that sell a TSC-2 capsule made by Transound.
I have a couple of questions,
The first is that its made of copper and not brass.........is this something to be concerned about?
Also, it only has three wires // Two from both center fed screw on both sides and only one backplate wire on one of the backplates.
My circuit is like the Dani boards where by I need to have two backplate wires to the pcb.
I spoke with Brad the owner and he told me that the plates are electrically isolated so if this is the case, should I not be able to add a fourth wire to one of the free holes on the plate that does not have the wire?
Last edited: