Klangfilm 063a help with a PSU

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Well I swapped out a Chinese cheap t14 and sure enough a full bodied signal! Now time to dig around and see if I have anything of better quality or hit up Moby thanks for the help!
 
I couldn’t find any extra transformers that would work in my stash. I’ve contacted Moby and am ordering one. I have a pair of his t14/1 in my c12 style mics and dig them. When I was originally tracing the mic pin out, it looked like the heater had 2 supply connections. I’m assuming this was since the wiring is pretty thin. Was this done on any other older tube mics?
 
Back
Top