Looking for a 3 Gangs Pot (500/1K/500) URGENT !

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I remember when Saint Quentin Radio used to stock the modular P11, but that was during the previous century... Nowadays they they only have the standard P11 pots...
But if Thomas can sell you one, your problem is solved.

Axel
(Ex Parigot, mais ça aussi c'était au siècle précédent, maintenant je suis bouseux ;) )
 
Salut Axel ! merci aussi pour la réponse j'apprécie, en effet Thomas en a et habite juste à côté de chez moi.

A charge de revanche si tu as besoin.
 
Hi all,

I am looking for a 3 gangs pots (500/1k/500) it's very urgent ! if someone have a clue...

Best
I have some Clarostat Modpots I could put together in that config but the 1k is linear instead of log. It might not make a big difference. Anyone know? I suppose I could just test one or compare to a Bourns.
 
Using single linear instead of logarithmic pot for audio level control is hard without adding resistor to fake log law as here:
https://sound-au.com/project01.htmThere are other solutions for this problem, output pad can often have one fixed value. This is cheaper and closer to optimum if needed attenuation is known.
I hope this is not for another Redd47 :)
 

Latest posts

Back
Top