Sammas
Well-known member
This is a meta-thread, made to allow you to keep track of the posts concerning this single issue - I will continue re-editing this first post.
- All should be contained in this first post - which is re-edited regularily.
- Everyone is welcome to reply with comments and pointers to things they consider relevant. This will be copy/pasted into the first post.
- On a regular basis, we delete all posts but the first, and bumps it to the top.
Forum Links
http://www.groupdiy.com/index.php?topic=4312&postdays=0&postorder=asc&highlight=ssl&start=0
9K PSU transformer question/problem - By Rob Flinn. Great PSU infomation about obtaining 18v & 15v required to run the SSL 9k preamp
http://www.groupdiy.com/index.php?topic=1519&highlight=mat04
MAT-02/Mat-04 Source Discussion and Comparison - Started by jeroddumas
http://www.groupdiy.com/index.php?topic=8415&highlight=ssl
How Does it Sound? - Svart's reply about why the 9K is a nice little project.
http://www.groupdiy.com/index.php?topic=3950&highlight=ssl9k
Completed 9K Boards and Parts Infomation - By Neeno, It includes infomation on cap's and heatsinking.
http://www.groupdiy.com/index.php?topic=7725&highlight=ssl
SSL 9000 Design Background - By uk03878. It contains some nice background infomation about the SSL 9000 series with an external link to comments straight from the designer Andy Millar.
http://www.groupdiy.com/index.php?topic=4731&highlight=ssl
Gain switch for 9k mic pre????? - By jeroddumas. Wiring Diagram and Resistor Values for the SSL 9K gain switch thanks to PRR
http://www.groupdiy.com/index.php?topic=4388&highlight=ssl
Cap Question for SSL 9k - By jeroddumas, contains infomation on alternative parts and there sources.
http://www.groupdiy.com/index.php?topic=5345&highlight=ssl
SSL 9K DC Coupling Comparison - By Volta, Outlining the possible differences between Keith's DIY design and the real thing in regards to DC coupling/servo based design.
http://www.groupdiy.com/index.php?topic=4982&highlight=ssl
9K Power Transformer Question - By jeroddumas, regarding an appropriate transformer for the job.
http://www.groupdiy.com/index.php?topic=5733&highlight=ssl
Another SSL 9K nearing completion - This time the work is by jeroddumas
http://www.groupdiy.com/index.php?topic=5350&highlight=ssl
Troubleshooting background hiss in the 9K - Possible remedies for Neeno's noise problem
http://www.groupdiy.com/index.php?topic=233&highlight=ssl
Gustav's DIY PCB's for sale - Great quality work, each set includes SSL mainboard, one psu board and one balancing board
External Links
http://www.beatbazar.com/guests/ssltech/
The DIY SSL 9k Homepage from its creator Keith (Aka SSLtech)
http://www.studio21.ch/diy/neeno/ssl9k/DIY_9k_Preamp.pdf
Parts List, Layout and Schematic for the 9K project - Provided by Neeno, includes the required infomation for the PSU and Balancing card.
http://www.studio21.ch/diy/neeno/ssl9k/ssl9k_test.htm
SSL9K comparison - Thanks to Neeno.
I couldn't find one so i made one... hope you guys don't mind!
- All should be contained in this first post - which is re-edited regularily.
- Everyone is welcome to reply with comments and pointers to things they consider relevant. This will be copy/pasted into the first post.
- On a regular basis, we delete all posts but the first, and bumps it to the top.
Forum Links
http://www.groupdiy.com/index.php?topic=4312&postdays=0&postorder=asc&highlight=ssl&start=0
9K PSU transformer question/problem - By Rob Flinn. Great PSU infomation about obtaining 18v & 15v required to run the SSL 9k preamp
http://www.groupdiy.com/index.php?topic=1519&highlight=mat04
MAT-02/Mat-04 Source Discussion and Comparison - Started by jeroddumas
http://www.groupdiy.com/index.php?topic=8415&highlight=ssl
How Does it Sound? - Svart's reply about why the 9K is a nice little project.
http://www.groupdiy.com/index.php?topic=3950&highlight=ssl9k
Completed 9K Boards and Parts Infomation - By Neeno, It includes infomation on cap's and heatsinking.
http://www.groupdiy.com/index.php?topic=7725&highlight=ssl
SSL 9000 Design Background - By uk03878. It contains some nice background infomation about the SSL 9000 series with an external link to comments straight from the designer Andy Millar.
http://www.groupdiy.com/index.php?topic=4731&highlight=ssl
Gain switch for 9k mic pre????? - By jeroddumas. Wiring Diagram and Resistor Values for the SSL 9K gain switch thanks to PRR
http://www.groupdiy.com/index.php?topic=4388&highlight=ssl
Cap Question for SSL 9k - By jeroddumas, contains infomation on alternative parts and there sources.
http://www.groupdiy.com/index.php?topic=5345&highlight=ssl
SSL 9K DC Coupling Comparison - By Volta, Outlining the possible differences between Keith's DIY design and the real thing in regards to DC coupling/servo based design.
http://www.groupdiy.com/index.php?topic=4982&highlight=ssl
9K Power Transformer Question - By jeroddumas, regarding an appropriate transformer for the job.
http://www.groupdiy.com/index.php?topic=5733&highlight=ssl
Another SSL 9K nearing completion - This time the work is by jeroddumas
http://www.groupdiy.com/index.php?topic=5350&highlight=ssl
Troubleshooting background hiss in the 9K - Possible remedies for Neeno's noise problem
http://www.groupdiy.com/index.php?topic=233&highlight=ssl
Gustav's DIY PCB's for sale - Great quality work, each set includes SSL mainboard, one psu board and one balancing board
External Links
http://www.beatbazar.com/guests/ssltech/
The DIY SSL 9k Homepage from its creator Keith (Aka SSLtech)
http://www.studio21.ch/diy/neeno/ssl9k/DIY_9k_Preamp.pdf
Parts List, Layout and Schematic for the 9K project - Provided by Neeno, includes the required infomation for the PSU and Balancing card.
http://www.studio21.ch/diy/neeno/ssl9k/ssl9k_test.htm
SSL9K comparison - Thanks to Neeno.
I couldn't find one so i made one... hope you guys don't mind!