Mic Input Transfomer Question

imloggedin

Well-known member
Joined
Dec 17, 2005
Messages
246
Location
mid-usa
Hey guys i have a question about my Edcor mic input transformer. Heres the schematic:

mxcs.gif


The one i have is a 1:8 transformer and im using Pin 1 & 3 on the mic side and 6 & 8 on the output side right now for a 1:8 output. If i use 1&3 on the input side and 6&7 on the output side will i have a 1:4 transformer? I believe so, but i wanna make sure before i do it. Thanks u geniuses.
 

imloggedin

Well-known member
Joined
Dec 17, 2005
Messages
246
Location
mid-usa
Thnx for the confirmation, i already hooked it up that way and it worked so :) Thnx still though..
 
Top