Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

To prototype the mixer I'm building now, I have, before I had proper transformers, tested with a 220V/12V transformer (could also be 220/24, I don't have any data on it), and, well, it passed sound, but I can't say much sensible about it concerning sound quality because I didn't test it very thoroughly.

You could try, and your low will at least extend to 50 Hz and around that point, it'll be probably fine, but that's all I can say for sure. I also think that you might not reach 8k or thereabouts.

By all means, try it for fun, I'm curious too, but don't expect too much.


Back
Top