MicMix C2A/B Sound Column connectors

[wave]

Does anyone know what the circular 6 pin connectors on these are? They look the same as the C3A/B sound columns too.

Thanks,
Dave

 

[gyraf]

You'll probably need to provide an image, or we're in the dark...

Jakob E.

 

[Gene Pink]

You'll probably need to provide an image, or we're in the dark...

Not everybody owns a digital imaging device. But in this day and age, everybody that posts on the internet really should. On the other hand, a lot of them really shouldn't. Selfies??? Narcissistic ********.

The Cannon EP-4/6/8 was used a lot back in the '80's, is this it? This is the Cannon EP-6, Alcatel also made compatible versions much cheaper. Showco and Meyer both used them in the '80's, but then Neutrik came out with the really cheap Speak-On, and everybody went that way in the early-mid '90's

 

[wave]

Thanks for the replies,
Upon much more research, it seems like the are Amphenol connectors. Specifically the male connectors I would need for the cable side are 91-MC6M and I found some on ebay...

Dave

 

[Winetree]

I found my MicMix sound column connectors. They are line drivers.
They read;

Model LZA
Sound column line amplifier
Install directly at sound column.
Use only with Master-Room unit having the same serial number shown below.
Serial number  SC-XXXXXXX
MicMix Audio products

I have two different  length columns so I don't know if there is a difference in the Line amps,
but the serial numbers go to the two different columns.