Midas TR Series Console HELP with rewiring mute switch wiring.

[Andybot]

Hi,
does anyone own a Midas  TR Series console who could help me with the wiring around the mute switch at the bottom. The switch was removed and i have no notes or usable schematic to go on. For clarification its a TR04 input module from a TR series Midas console.
Later i will post pics of the massacre.
Thx

 

[pucho812]

if you have the console and it's only the one channel that is different, wire it to match the others or am I missing something here?

 

[Andybot]

Its a good idea but i only have the one strip.
Thx

 

[Andybot]

Pics of the wiring on the Midas TR04 Input strip.Thx

 

[Andybot]

Second Pic.

 

[pucho812]

I think you have asked about this channel strip before. Anyway I did a google search this morning and found the following  manual with schematics... 

http://bee.mif.pg.gda.pl/ciasteczkowypotwor/SM_scena/Midas/tr-console.pdf

 

[Andybot]

Thx Pucho812 for your kindness. I have this one and the schematic i need is very badly scanned.
Thx

 

[pucho812]

maybe try and clean up the scan?

 

[Bo Deadly]

Unfortunately, from looking at the "schematic", there are mute buttons all over the place on p35, 37, 38, 39 and possibly 30 and 31 as well. So the next step would be to figure out which one corresponds to the one you're trying to fix.

Also, you might check that switch for problems. Otherwise, why is it all pulled apart?

 

[Andybot]

I contacted a friend who can help me out when he returneth.
Thx All

 

[ruffrecords]

I think you have asked about this channel strip before. Anyway I did a google search this morning and found the following  manual with schematics... 

http://bee.mif.pg.gda.pl/ciasteczkowypotwor/SM_scena/Midas/tr-console.pdf

Thanks for posting this - it has a really interesting twist on the LED VU meter question.

Cheers

ian