Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Pip" data-source="post: 925025" data-attributes="member: 814">The fuse didn't blow? Please check that the ground is intact through-out the whole circuit. The body of the mic should never have been able to get energized without the fuse in the PSU blowing. Your friend is very fortunate. That cap is the output cap yes so if it failed or the solder connection failed that would explain the no output and possibly how the body was energized but again the fuse should have blown.</blockquote>