Modded LA-610 Needing Repair

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
FYI His unit has been repaired and returned to him with a chunk of the mod removed, along with some of our own fixes added. I will let him comment further. His was originally modded by CC&E, not used/checked upon return, then later was found to not function properly at all.

We adjusted the heater voltage to 6 volts (it was still stock). We moved the filament voltage regulator to the chassis so it could cool itself (they run SUPER HOT in stock configuration/location). We moved the Lundahl transformer included in this mod to a better/closer location - and further from the power supply. We fixed everything that did not work (instrument level input, high eq), and got signal to pass properly. Mounts were made for V5, and for the T4b, which was just flopping around on a board. (we have also since designed our own boards which incorporate legs to properly support the T4b.

Anywho - it behaves like a 610 now, rather than a doorstop.
Do you have a website etc for your services? Might be handy for the future. Either way it was good of you to help him out.

Thanks
 
Do you have a website etc for your services? Might be handy for the future. Either way it was good of you to help him out.

Thanks
Thanks Vintagelove - good idea. We are not big self-promoters. Quiet backline guys.

There was a site for the gear we sold, then we took it down when we added service to the public. Now there is just a placeholder page. We are working on a new site with all kinds of DIY parts and goodies, along with our stuff. Anywho, it is amp-haus.com. We are in the bustling (not) Charleston SC area.

-Tony
 

Latest posts

Back
Top