MXL v77 wiring help

[Coldsnow]

Hi all
So I tried to take out the tube which was soldered in.  Upon doing so, I pulled quite a few wires from the old socket.  I'm now trying to put in a new one.  There is an old thread that has a picture but it is not clear enough to make out.  Could someone help.  Basically I need to find where the first 4 pins go including the red wire from the capsule and them there are two ground wires one on Each side of the socket, and two white wires.  Thanks to a anyone who can help.

 

[Khron]

Have you considered looking up a datasheet of the respective tube? I'm sure the pinout would at least provide some hints

 

[Gus]

found this from 2004
https://groupdiy.com/index.php?topic=3744.0

 

[Coldsnow]

Thanks I have looked at that thread a lot and cannot make out from the pics where the wires go on the socket.  I will look up the tube pinout although still will need some help.

 

[cyrano]

I often forget to take a pic before handling gear.  :

Maybe you could post some pics? That would sure help us to figure out your problem?