Mxl990

[riggler]

Can anyone get me a measurement of the MXL 990 PCB?
Thinking of using this as a donor mic for my tube mic project. Any other internal measurements / clearances appreciated.

I guestimate the diameter of the board to be about 55 mm ... But I don't have the mic yet.
Thanks

 

[seavote]

inner diameter of the tube is 57mm so 55 for the pcb is about right. i dont have anything to measure mm at home at the moment.  the length of the tube is 1 7/16" inches,about 36-37 mm.

 

[riggler]

Thanks so much!!!

 

[kato]

This one looks a little bit bigger:
http://www.musiciansfriend.com/pro-audio/mxl-v250-condenser-microphone

 

[Blue Jinn]

What are you planning to build? I thought about the M??? (can't remembr the mic or hte tube at the moment, it's similar to a USA 6K4 though... ) which looks pretty simple p2p.