Purusha
Well-known member
I would like to thank Gyraf, Greg, Clintrubber and all you nice guys on this great forum who helped me bring the project almost to the end :thumb:
MY CUSTOM G-SSL 4000-E
More detailed pictures here:
The front panel came out a little different than what I planed in the beginning. I wanted black print a golden surface, but the guy who made them couldn't do it without any complications so I went with black one and it turned out just great. Very happy.
So far I need to wire the ins and outs and check for some errors on my perfo-board. Otherwise the compressor was working great when I calibrated it before the true bypass addition.
As you can see there is a perfo-board stuffed with extra goodies - dual Thrust filter, true bypass with relays, double VCA THD trimmers and overload meter.
And the back side:
I also left the option to have a switch for two scale metering. It might be cool when you want to squash the drums :green:
QUESTION
I will definitely have to make new PCBs to replace my messy perfo-board
addition. Is there any nice program where I can draw the PCB layouts?
MY CUSTOM G-SSL 4000-E
More detailed pictures here:
The front panel came out a little different than what I planed in the beginning. I wanted black print a golden surface, but the guy who made them couldn't do it without any complications so I went with black one and it turned out just great. Very happy.
So far I need to wire the ins and outs and check for some errors on my perfo-board. Otherwise the compressor was working great when I calibrated it before the true bypass addition.
As you can see there is a perfo-board stuffed with extra goodies - dual Thrust filter, true bypass with relays, double VCA THD trimmers and overload meter.
And the back side:
I also left the option to have a switch for two scale metering. It might be cool when you want to squash the drums :green:
QUESTION
I will definitely have to make new PCBs to replace my messy perfo-board
addition. Is there any nice program where I can draw the PCB layouts?