My first API 500 module ;-) (Passive Signal Splitter)

[Holger]

Fully API 500/51X compatible passive signal splitter based on a Sowter 4679 transformer.
Has XLR and Lemo outputs. Frontpanel is from Frank/NRGrecording.
I'm claiming here to be the first guy who has built an API module with a PSU current consumption of 0 mA

 

[jsteiger]

Fully API 500/51X compatible passive signal splitter based on a Sowter 4679 transformer.
Has XLR and Lemo outputs. Frontpanel is from Frank/NRGrecording.

Very cool Holger!  8) 8)

I'm claiming here to be the first guy who has buillt an API module with a PSU current consumption of 0 mA

I think you are right. For this, you must get a prize!  ;D  Will for sure help to balance out some overly hungry modules.

Best, Jeff

 

[nrgrecording]

8)

 

[nickeveslage]

Nice!

Revolutionary! ha

 

[strangeandbouncy]

Excellent!


  but where did you get that rear connector-strip thingy?



  Kindest regards,


    ANdyP

 

[Holger]

strangeandbouncy,
Jeff as well as Silentarts/Volker have them in stock
http://classicapi.com/catalog/product_info.php?cPath=87_88&products_id=164

 

[strangeandbouncy]

Holger,



  thanks for the education!


  kindest regards,


    ANdyP

 

[Denyle Guitars]

I'm claiming here to be the first guy who has built an API module with a PSU current consumption of 0 mA

I once stuck a fader into a blank lunchbox panel to use as an attenuator. That was probably 2 years ago. It was by no means as pretty as your splitter though.  ;D

 

[okgb]

I have a blank panel that i didn't do anything on
waaay more than passive [ inactive  ! ]

 

[wowi]

Very impressive. 

Looking to your output on DIY project comes a question to my mind:

Don't you need any sleep ?  ;D

Wolfgang

 

[[silent:arts]]

strangeandbouncy,
Jeff as well as Silentarts/Volker have them in stock
http://classicapi.com/catalog/product_info.php?cPath=87_88&products_id=164

since you are in the UK, Cemal (Sahib) stocks them too

nice work Holger, but I have to re-check the power specs ...
0mA will work in the GroupDIY 51X Rack, but I have heard there are PSU problems in some other Alliance products ;D