N-Sonic Alctron N73 Strip Power Supply Needed, Please Help!

[Dorcia]

I'm new here so please excuse me if I'm posting in the wrong place but I desperately need some help. I bought a used N-Sonic Alctron N73 Strip. Basically the same as the Alctron MP73EQ 1st version. My wife was helping me hook things up and she plugged the power supply into the wrong device. Of course the power supply no longer works. I know very little about electronics but I know enough to use the proper power supply. So I have looked everywhere for a matching power supply to replace this thing and there is literally nothing out there, so I figured I would start here. I just need to know if there is anyone who can point me in the right direction. I have included images of the power supply and the channel strip. I would be greatly in your debt if someone can tell me where I can order the same power supply or something that will be compatible. Thank you so much in advance!

 

[Brian Roth]

Odd that wall wart would fail because it's just a simple transformer. But, this one should work:

https://www.jameco.com/z/GPU5724020...-to-AC-Wall-Adapter-Power-Supply_2197548.html
You might have to change the plug on the output end.

Bri

 

[Dorcia]

Odd that wall wart would fail because it's just a simple transformer. But, this one should work:

https://www.jameco.com/z/GPU5724020...-to-AC-Wall-Adapter-Power-Supply_2197548.html
You might have to change the plug on the output end.

Bri

Fantastic, thanks so much. I broke the old transformer open and it smells like burned electronics if that makes sense. Again, thank you so much!