Need four small countersunk holes drilled in Los Angeles

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

soapfoot

Well-known member
Joined
Dec 27, 2010
Messages
801
Location
LA + Brooklyn
Hello! Need a total of four small countersunk holes drilled in a precise location in the steel side rails of some FLEA C12 microphone bodies (one hole per rail).

Hole diameter about 1.5mm; anything reasonably close to that should be okay.

Would prefer someone close enough to drive from Pasadena.

Price negotiable--whatever seems fair.
 

soapfoot

Well-known member
Joined
Dec 27, 2010
Messages
801
Location
LA + Brooklyn
S&K general precision machining in Glendale

It wasn’t the cheapest, but it was a tricky job and they turned it around quickly

I didn’t get the sense that they worked on this kind of thing often, but they built a fixture just for the job and were very careful not to damage the microphone body
 

Latest posts

Top