Neumann V482-6 Frankensteining

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

livingnote

Well-known member
Joined
Aug 12, 2007
Messages
1,048
Location
Berlin, Berlin
Hey all,

I need a few distribution amplifiers for the studio here and since Ebay is traditionally overflowing
with Neumann V482 -6 nobody knows what to do with I got myself a stack of them.

Checked out the plans on kubarth.com and from what I can tell it's just a simple transformer input
to standard unity gain opamp and then...and here's the part I don't get:

...goes on to the output transformers with an MO-9 stage before hitting the trannys.

But on the actual cards as far as I can tell there's just the input opamp and that gets distributed directly
to the output transformers without an additional output amplifier stage.

Was this standard or changed after a while - that the MO-9 was done away with -, and from a workhorse-
building standpoint would it make sense to include them in a design? ^m looking to make a stereo version
that has two or three outputs on one card instead of 6x Mono.
 

Latest posts

Back
Top