Reply to thread

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

Hello! I'm currently working on building myself 2 1073 in the 80 series modules (I know, I know there are easier ways like a ez1073 but I love a challenge).
While looking at pictures of vintage modules and more recent ones (BAE, Heritage, AMS....) I saw a lot of different wiring for the impedance switch, especially in the vintage ones (I'm guessing some of thoses were modded in some ways because from what I was seing it just didn't make sense).
Anyway if I'm reading the schematics correctly, I could do the wiring ofthe impedance switch that way;
[ATTACH=full]112010[/ATTACH]
Is this the correct way to do the wiring for this one? I'm interpreting based on this schematic;[ATTACH=full]112011[/ATTACH]

That's it thank you all

<blockquote data-quote="MathCantin" data-source="post: 1099957" data-attributes="member: 137016">Hello! I&#039;m currently working on building myself 2 1073 in the 80 series modules (I know, I know there are easier ways like a ez1073 but I love a challenge). While looking at pictures of vintage modules and more recent ones (BAE, Heritage, AMS....) I saw a lot of different wiring for the impedance switch, especially in the vintage ones (I&#039;m guessing some of thoses were modded in some ways because from what I was seing it just didn&#039;t make sense).Anyway if I&#039;m reading the schematics correctly, I could do the wiring ofthe impedance switch that way; [ATTACH=full]112010[/ATTACH]Is this the correct way to do the wiring for this one? I&#039;m interpreting based on this schematic;[ATTACH=full]112011[/ATTACH]That&#039;s it thank you all <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" /></blockquote>

[QUOTE="MathCantin, post: 1099957, member: 137016"] Hello! I'm currently working on building myself 2 1073 in the 80 series modules (I know, I know there are easier ways like a ez1073 but I love a challenge). While looking at pictures of vintage modules and more recent ones (BAE, Heritage, AMS....) I saw a lot of different wiring for the impedance switch, especially in the vintage ones (I'm guessing some of thoses were modded in some ways because from what I was seing it just didn't make sense). Anyway if I'm reading the schematics correctly, I could do the wiring ofthe impedance switch that way; [ATTACH type="full"]112010[/ATTACH] Is this the correct way to do the wiring for this one? I'm interpreting based on this schematic;[ATTACH type="full"]112011[/ATTACH] That's it thank you all :) [/QUOTE]

Verification