NEVE VR plasma meter

[Rocinante]

So as I understand it the power supply for the meters is a 240v 50w unit. Is this something that could be built? There is also a controller board that interfaces it the VR console? I also understand that calibration for the meters is arduous and requires a manual. Any help would be appreciated.

 

[zamproject]

Hello

What is the point? fixing a VR meter or building a plasma driver ?
Just a new supply ?
For sure plasma need HT...
Vishay PBG series I suppose ?

Best
Zam

 

[Rocinante]

Hello

What is the point? fixing a VR meter or building a plasma driver ?
Just a new supply ?
For sure plasma need HT...
Vishay PBG series I suppose ?

Best
Zam

So customer bought the VR knowing the plasma meters PSU was missing as well as the 'control board' or 'controller'. I am actually building him something else (mon ctlr) but I figured I could ask around to see if there is something that could be done. We have a lead on a psu but then there is the control board issue.
Fwiw These channel are packed insanely tight.

 

[pucho812]

what you want to do is check with John Musgrave.

 

[Rocinante]

Thanks Pucho

 

[pucho812]

Thanks Pucho

well john ran mad labs for years doing the v series upgrades,, if anyone knows it would be him.

 

[Rocinante]

I remember reading about him and his mods and recaps. At this point I really just want to make sure the plasma tubes are in good shape as the customer thinks that one of them might be leaking.
A very awesome and generous member here is hooking me up with some scans.