OPENED WHITE MARKET!!!1176 REV G (FEELER)

[ForthMonkey]

Circuit

https://dl.dropboxusercontent.com/u/91809016/1176/1176%20Schematic.pdf

Video sample

https://youtu.be/aLv1jPlFSEg

Send me PM.

Just started to build my trafoless 1176.It's almost done.Compressor and PSU on same board.Really squiezed! 10x10cm,so able to build it as 500 series.

Sound samples: (No calibration,yet)

https://soundcloud.com/tuncak-1/sets/76a

This week i will try it.

 

[ForthMonkey]

Now i'm waiting for meter to calibrate it.And desinging front panel,too.

Calibrating it little bit complicated,i guess.I'm trying to understand...

 

[iprovlek]

You are C R A Z Y ForthMonkey!

Thumb
Thumb
Thumb

;D

 

[ForthMonkey]

I got it work but only in and out pots reacting.Can't get compression,yet.I believe,it's about calibration.

Any idea?

 

[ForthMonkey]

It's working! Added sound samples to first post.

 

[ForthMonkey]

I have problem about Ratio.I'm getting variable signal because of Ratio.Lowest signal with 4 and highest signal with 20.But when adjust Q bias,signal coming same level with 4 & 20 but i can't get compression.What is problem?

 

[iprovlek]

I hope that will be soon!!!

 

[jordan s]

Did you ever figure out the issues with this one? Is it possible to do an "all buttons" mode?

 

[Whoops]

this is a great idea and quite inexpensive to do.

Is your unit working?

 

[ForthMonkey]

Finally "Feeler"

 

[ForthMonkey]

Finished my unit.I will add video sample,too.

 

[ForthMonkey]

I will open White Market thread,soon.You can find PCBs in there.

 

[frazzman]

Is there a complete schematic for this project?

 

[ForthMonkey]

Is there a complete schematic for this project?

Added to first post.

 

[jordan s]

Do you have a  BOM or calibration instructions?

 

[frederickalonso]

Actually it sounds pretty damn nice in the video

 

[konqret]

Is this not Actual? Links are not working.
I see You did 10x10cm pcb , did You used PCBway?

 

[AudioPro]

Hi guys, is it possible to share the schematic again(if somebody is keeping it still)?Thanks

 

[ipindalieson]

Any change of re-uploading the schematic or the files?

Thank you