OPENED WHITE MARKET!!!1176 REV G (FEELER)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ForthMonkey

Well-known member
Joined
Sep 4, 2013
Messages
1,115
Location
Turkey
Circuit

https://dl.dropboxusercontent.com/u/91809016/1176/1176%20Schematic.pdf

Video sample

https://youtu.be/aLv1jPlFSEg

OAjBl4.jpg


Send me PM.

Just started to build my trafoless 1176.It's almost done.Compressor and PSU on same board.Really squiezed! 10x10cm,so able to build it as 500 series.

Sound samples: (No calibration,yet)

https://soundcloud.com/tuncak-1/sets/76a

This week i will try it.


Z7BbXk.jpg


7Mn0aP.jpg
 
Now i'm waiting for meter to calibrate it.And desinging front panel,too.

Calibrating it little bit complicated,i guess.I'm trying to understand...
 
I got it work but only in and out pots reacting.Can't get compression,yet.I believe,it's about calibration.

Any idea?
 
I have problem about Ratio.I'm getting variable signal because of Ratio.Lowest signal with 4 and highest signal with 20.But when adjust Q bias,signal coming same level with 4 & 20 but i can't get compression.What is problem?
 
Did you ever figure out the issues with this one? Is it possible to do an "all buttons" mode?
 
Back
Top