Yes, I believe green would be 2 which feeds to the grid of V1 through RL1. Grey to 1 gets grounded because it's a single-ended circuit as opposed to a deferential circuit. Violet would be a tap for probably a 3.5:1 ratio similar to the Cinemag CM-9661A. I would try the white wire to junction of R-Z & C-Z and adjust suggested Zobel, or leave unattached.If I’m understanding this correctly, according to this Orange 86 schematic I know I connect the secondary as Green to 2 and Grey to 1 on the PCB, then if I want to experiment with the center tap further I’d solder Violet (1:7 with the 34.5% tap) between the junction of R-Z and C-Z? As a side note, they’ve been adjusted to the suggested 470pf and 10k for the Sowter.