• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Pcb reddi (30cm large) (finish)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bernardo

Well-known member
Joined
Dec 8, 2019
Messages
186
hi i have 2 clone reddi pcb units, they work perfectly. They are ideal for mounting in a 2u box rack.
Pcb double,two faces.
 

Attachments

  • B7A548C2-4635-4FA4-B763-42E86BF0F417.jpeg
    B7A548C2-4635-4FA4-B763-42E86BF0F417.jpeg
    77.3 KB · Views: 177
  • 55BF654F-C305-48A2-B04A-350C14D0FADC.jpeg
    55BF654F-C305-48A2-B04A-350C14D0FADC.jpeg
    220.7 KB · Views: 166
Last edited:
The overall build looks rather dangerous to me. The safety ground pin of the mains IEC inlet is not connected to the chassis.

Cheers

Ian
 
Hello friends, thanks for the constructive criticism, the image is that of the unfinished project. I will post an image of the construction of the project. Thanks a lot
 
the output transformer winding of the heaters is 6.3v not 6.2
 

Attachments

  • 46AEF27D-C9F2-4C4B-930E-050A37E8EA87.png
    46AEF27D-C9F2-4C4B-930E-050A37E8EA87.png
    437.5 KB · Views: 67
No voltage regulator installed, meter and pot not wired, looks mid-build to me!
according to the reddi groupdiy thread the regulator is not essential, in fact this pcb works fine without it. I have built other valve projects even without rectifying the heater windings, only deriving one side to earth and they are very quiet, advice from very popular people on this forum that I learn daily thanks to them. a greeting.
 
Back
Top