bradholland
Well-known member
Hey Guys,
we have a whole load of meterbridge stuff which we havent been able to get working for a long time now.
We actually have a neve 66 with a set of 51 series meters but we also have a set of v3 meters which have an extra card on teh top of each meter module as shown in the pic.
i know that the long ribbon signal cables attach to the card and the two blue connectors towards the right go to teh meter inputs. and the regulator card also goes direct to teh meter modules
however this wont work as is, because i dont know how or what to connect to the first blue connector on the right side.
I'm guessing this is for power, vu/ppm switching and or signal / dynamics switching.
If i knew what the pinout of this connector was or where it should be connected to i might have a fighting chance of getting them working.....
any help appreciated.
we have a whole load of meterbridge stuff which we havent been able to get working for a long time now.
We actually have a neve 66 with a set of 51 series meters but we also have a set of v3 meters which have an extra card on teh top of each meter module as shown in the pic.
i know that the long ribbon signal cables attach to the card and the two blue connectors towards the right go to teh meter inputs. and the regulator card also goes direct to teh meter modules
however this wont work as is, because i dont know how or what to connect to the first blue connector on the right side.
I'm guessing this is for power, vu/ppm switching and or signal / dynamics switching.
If i knew what the pinout of this connector was or where it should be connected to i might have a fighting chance of getting them working.....
any help appreciated.
