Please help me about output of STUDER 169 module

[gj94up4]

I'm a novice...and I'm really stupid...
I've connected the power of STUDER 169 micpre module.It's OK.
That input is simple from XLR, But i just don't know where is the "output" of STUDER 169 micpre module.
Can anyone help me how to connect the output.
Very thankful!!

 

[ethervalve]

Try inserting a 1/4" TRS plug halfway in (one 'click', rather than two) to the insert jack for an unbalanced pre-fader direct out.
There are jumpers on the card that allow you to choose where the insert sits in the signal flow (pre or post eq, for instance).
If you don't have the manual, you should get a copy from the Studer FTP, it's a really clear and thorough document. ftp://ftp.studer.ch/Public/Products/Mixing_Analog/169-269/Manuals/

 

[gj94up4]

Hellow ethervalve,thank you so much for your guide.
I come back studio today and test it.
I use a 6.3mm mono phonjack halfway into it and now is working!!

But i also have a question:
Can i simply use a 2P(on/off) switch to contol +48V phantom power?(like the photo)
Is this way will damage microphone or STUDER 169?

Please forgive my English...
Thank you once again for your guidance!!

 

[pan]

RE: phantom: That would be the easiest and most practical solution.

 

[ethervalve]

Glad to hear it's working! I concur with Pan RE phantom power. Your switch idea looks fine to me.

 

[MagnetoSound]

I like that you used an actual photo of a switch!

 

[pan]

Here you find a great resource and an interesting read concerning restauration of Studer 169.