pultec eqp-1a3 Knobs

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
[quote author="drpat"]The skirt on the solid state knobs are 1-1/8", and they look nothing like the tube knobs...[/quote]
not all ..the bandwidth skirt is a little smaller..atleast the ones I've seen.
 
drpat,

while I have your attention-what sockets did you use for the fitting the 2520 in your build?I know the part number of the regular ones but the ones you used seemed to have a rubber grommet like thing much like the original
 
[quote author="drpat"]You're talking about the frequency select knob for the SS HF ATTEN section, right?[/quote]
Correct ..I got a winged knob with a aluminum insert on top.I was thinking I'd spray it with black paint and use it ...big mistake first of all the knob I got was much bigger than the original.Secondly I discovered that the knobs are kind of unique..there is a small groove in the original knobs (all of them- wing,big knob and small).
The wing knob body dia was approx 18-19mm and the wing dia seemed same as the big knob skirt dia.

It'd be really great if you can find those knobs at your surplus store
 

Latest posts

Back
Top