Unfortunately no, I only order 3 (and used 2), and there is no plan for more or DIY release. This dynamic processor is in production by SPL, there is nothing original in my implementation, and I don't want to mess with anyone.Hope you get any spare pcb to sell..
Thank you !Please a picture of the stuffed pcb's. The outside looks really pro!
Tks tommiaThat really looks pro too! Congrats!
According to the Traco SMPS's specs, minimum load should be 10% of rated max current. The 5V is rated for 3000mA... so it should be loaded with at least 300mA for proper operation. Your 15ohm resistor gives a 333mA load... pretty close to the minimum15ohm resistor added to 5V rail, to permanently load at least 10% but I'm not happy with that, to many power lost with heat.
For now the unit is closed and installed back in the rack, but I'll probably change the PSU later...
Enter your email address to join: