Quick G7 Question

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

marktokach

Well-known member
Joined
Feb 5, 2008
Messages
169
Location
New Braunfels, TX
How does the tube pcb connect to the main pcb? Do I use old resistor leads, wire, or something else designed for the task? I imagine they should be as short as possible. Maybe even shielded. TIA
 
As Roddy says, solid core wire / thick lead trimmings work just fine. If the wire is thick enough it'll support itself without glue.
 
I think I used pins from an L-shaped edge connector, something like this:

pr1x40uk2_zuum2-medium.jpg


just pull them out from the connector.
 
Back
Top