Quick PCB terminal block Q for the SSL9k board

[MartyMart]

..... anyone know if the pitch for I/O etc is 3.5mm or 3.81mm ??
Just to order the correct PCB mount terminal blocks like these :

http://www.rapidonline.com/productinfo.aspx?kw=PCB%20connectors&tier1=Cables+%26+Connectors&tier2=Connectors-Terminal+Block&tier3=3.5%2f3.81mm+PCB&tier4=6A+Interlocking+terminal+blocks&moduleno=63807

Thanks,
Marty.

 

[kato]

Those are both too big! except 2 spots on the PSU board.

Wait, I'm assuming you're talking about the recent run that Gustav did. I've seen pictures that suggest there was an older run of 9k boards with a different design. See this thead: http://www.groupdiy.com/index.php?topic=6808
(that board does not look familiar and wasn't part of the most recent batch.)

The interconnects on the most recent run look like 2.5mm.
But the holes are too small to use a terminal block.

If anyone knows the story between the different designs, I'd be interested in hearing. Onto the meta for me...