Rack Ears

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Recording Engineer

Well-known member
Joined
Jul 30, 2013
Messages
1,311
Location
Sacramento, CA
Anyone know where I can get 1-inch (on the face, 1” angle iron would do fine), black anodized 2U rack ears, for a piece of gear (not a cabinet/case)? I know I can get it custom or make it myself, but I’d imagine someone already has it as stock.
 
These seem to fit your dimensions. More expensive than angle iron.

https://www.ebay.com/itm/RACK-MOUNT-EAR-BRACKETS-2U-HEAVY-DUTY-USED-PAIR/123633370841?hash=item1cc91f86d9:g:emoAAOSwSU1bRrtB&frcectupt=true

https://www.ebay.com/itm/Pair-Cisco-2u-Rack-Ears-700-106442-01/302908686161?epid=26007921233&hash=item4686c3bf51:g:ZF0AAOSw53hbtmr-

sorry about this URL. Jeez.

https://www.ebay.com/itm/AMX-2U-Rack-Mount-Ears-With-Screws-NI-3100-3000-2000-Axcent-2-3/173802191826?hash=item28776afbd2&enc=AQADAAAC8FjVrDbVsZ8oH%2F8PNHtt9VX4%2Fw7FZcmMuqsX8uaFEduVqXXKYRGR7%2FUYzmLcM4AWEcqpv42kYUT9lAT7%2FNmf%2F0w3PZ0gLqp4W7rEC%2Btceu2elgdaImgClLrpmhRcqhtcoE%2Bu59L5O1p9swRF27SSEWQ9qHrNQdhgtGtta5cxEJI2z%2Bcyk81jjfvZLk0%2BpmWtmeCK1BKaLuOXouTVQVvFzgRSdsl65yrGUGrX2GSZngPIVprgfOMiSyYk5b6sGxvCfRUw07Tzqf41rqMnaodb7EttMSq0YHkanV%2FX2QdJ%2FqC4AKoKQ3Kmv3Xu2J7Ui9vAg5e7jhA3wY545yvivyfIqUR0sfcxRsIUktVfWhVDcyzeazGNXQbIa4yn5wPUpOkYgO5S%2BZk8hMGjBaHL7rMq3g%2BUTdZHd6QoKtmERdP8xB44nHvobCesCzBJU%2BwtRzXjdc17edASVOZlg06f3kGRyjtm5hRL3Ij2D6NRA%2Fly6S5V7vX%2FKj2ZkKdWpo8YXzLuQa82jAheIeBPCWqwaNYh4OW2n37Ao9mQctiXZgQQEa3DS%2BVQDFgS14274giES%2FL50bCHcJDMjHPYeHgPNxuLssEIdRHIoMcQxYTTs030bd6UkzvasLZVhwQnrAZ3CEEZh%2Fs9FUryksehm6XdBVRayUxHeeyJwrnJIYVP%2FUgwuldHKsu6mCnDgHpAU%2FFKbHMHbFoFn%2Fl%2BOKHH1tNN7IlxRSbxFuQSg7GWSbicGYgqWqYyx4eAxrevXxl%2FsGUWpwJshT%2F4QY88RIXyil5ByYKZU081pslz93aDWuO24eemucar94LJX7eBuZkonVER5Xfv%2Bdgoixjv8nJL76B30K9jiF0KN2TJiuWHZH1QzLdyAix7N8WhnXvm4u1CXU%2BVWkhL0W76DnlBqq7kqBlupUc%2FfpFHhQDw5kSF4Dr0zkQFdQ17178%2B3l0B7K0vQCxU%2F9WIXpVsV4qK8XVXqXJkVLlTLYkWS5BIup6G7sJKtAKBZBdI&checksum=173802191826c6f30d7d19c1438dbca8ea8f247a771e

 
Thanks a bunch! I picked up the one in the first link!

Yes, much more expensive than angle iron, but not bad at all. I’ve too many other things demanding time... Not like the early years when I drilled and tapped a huge studio’s-worth of cabinet rack rails after building the racks themselves!
 
Back
Top