I'm looking if there's enough interest in making enclosures with custom front and back panels.
Enclosures currently available are: 1, 2 and 3 RU; depths: 240mm, 300mm and 420mm respectively. They are powder-coated black and made from steel. There're some other depths available too.
Front panels are 6mm thick aluminum, powder-coated black as well.
I can mill holes and cut-outs, and engrave text. I can take FPD files, so this should be pretty convenient. As an example you can look at my FP for 1176 here:
http://www.groupdiy.com/index.php?topic=38569.msg475310#msg475310
(Nevermind white screws, I've changed them to black later).
I estimate 1RU enclosure cost around 140$, 2RU enclosure - 150$, 3RU enclosure - 170$. In theory, this includes EVERYTHING, that is: enclosure itself, front and back panels milling/engraving and shipping worldwide. Although the price might be adjusted a bit.
Thoughts and suggestions are appreciated!
PS. On the picture, there's a gray version of the enclosure. My particular enclosures are black.
Enclosures currently available are: 1, 2 and 3 RU; depths: 240mm, 300mm and 420mm respectively. They are powder-coated black and made from steel. There're some other depths available too.
Front panels are 6mm thick aluminum, powder-coated black as well.
I can mill holes and cut-outs, and engrave text. I can take FPD files, so this should be pretty convenient. As an example you can look at my FP for 1176 here:
http://www.groupdiy.com/index.php?topic=38569.msg475310#msg475310
(Nevermind white screws, I've changed them to black later).
I estimate 1RU enclosure cost around 140$, 2RU enclosure - 150$, 3RU enclosure - 170$. In theory, this includes EVERYTHING, that is: enclosure itself, front and back panels milling/engraving and shipping worldwide. Although the price might be adjusted a bit.
Thoughts and suggestions are appreciated!
PS. On the picture, there's a gray version of the enclosure. My particular enclosures are black.