Cosmonaut
Well-known member
Hi everybody, I'm working in my Roland Re501 before selling it, delay and reverb are working fine but chorus is not working,
After looking at the service manual: http://www.synfo.nl/servicemanuals/Roland/RE-501_SERVICE_NOTES.pdf I am checking this:
-When chorus switch engaged with direct signal off, just the unaffected signal is present.
-I cannot find LFO signal in R30-C25 junction, and I have changed IC8 without results.
I was looking for any suspicious electrolitic cap, but didn`t found any that could affect this part of the circuit, what else should I look for?
Thanks in advance.
After looking at the service manual: http://www.synfo.nl/servicemanuals/Roland/RE-501_SERVICE_NOTES.pdf I am checking this:
-When chorus switch engaged with direct signal off, just the unaffected signal is present.
-I cannot find LFO signal in R30-C25 junction, and I have changed IC8 without results.
I was looking for any suspicious electrolitic cap, but didn`t found any that could affect this part of the circuit, what else should I look for?
Thanks in advance.
