Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I am aware of the effect that the capacitor value has when used as a cathode bypass. My concern was with that big of a value the low end being pushed through the output tubes would cause and undesirable amount of over saturation as I had previously only seen 25uF used in that position. Clearly I have been overlooking this as I have seen schematics for those other amps but my mind for some reason did not pay attention to the actual value listed.


Thanks!


Paul


Back
Top