shock mount for Crown SASS P microphone

[ubxf]

In the crown PZM application guide https://coutant.org/pcc160/127089.pdf
it recommends on page 21 to use a shock mount for the SASS microphone to record moving vehicles .
Is there an existing commercial solution or is it a DIY project.

 

[emrr]

Samar has just introduced something that might work. Offhand I can’t think of another commercial solution, I suspect mostlY DIY in the past. JWSOUNDGROUP forum folks might have some ideas.

 

[ubxf]

Great thanks Doug. Mark's ShokBase looks interesting https://samaraudiodesign.com/ShokBase.html
In my case I'm looking for a solution to mount the SASS at the end of a boom pole attached to a 4X4 driving off road so it might need to be robust. I'll contact Mark and see what he says, and check the JWSOUNDGROUP