SIAM 295b aka Poor Man's W295b

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
MonoCutter was kind enough to send me some PCBs for testing and it worked out really well :) I've managed to add all the recent changes either by slightly modifiying the PCB or through the addition of a small daughter board. During testing I also spotted a small mistake in my schematics, which has now been corrected in Rev 05d.
 

Attachments

  • PXL_20220910_101547779.jpg
    PXL_20220910_101547779.jpg
    3.9 MB · Views: 0
The pcbs for krabbencutters REV 05d arrived and i couldn't wait to test them. The EQ worked as it should right from the first power up.
A next step will be to replace the pots with rotary switches. After that i would like to try different transformers.

Sometime in the future (after finishing all other projects :ROFLMAO:) there might be another revision of the pcb.
 

Attachments

  • 1665932962457.jpg
    1665932962457.jpg
    1 MB · Views: 1
  • 1665932962442.jpg
    1665932962442.jpg
    1.1 MB · Views: 0
  • HF&LF 16 dB.png
    HF&LF 16 dB.png
    70.5 KB · Views: 0
  • Mid Range 2 dB.png
    Mid Range 2 dB.png
    95 KB · Views: 0
  • Mid Range 4 dB.png
    Mid Range 4 dB.png
    117.5 KB · Views: 0
  • Mid Range 6 dB.png
    Mid Range 6 dB.png
    139.2 KB · Views: 0
  • Mid Range 8 dB.png
    Mid Range 8 dB.png
    150.9 KB · Views: 0
Back
Top