Simple DiodeBridge Compressor

[richiyobs]

Very proud ... It sounds really cool... Tests went fine... Each kind of track i send to It sounds great... Now Gr Meter It s ok ... I can draw a shaped PCB for that Gr driver to fit into
i ll upload 2 bounces of a drum stem ... Fast and moderate release...now I can t from my old mobile
Best

 

[richiyobs]

here the samples
i only forgot to bounce the original flat drum... but you feel the difference between settings
the stem it s only balanced in level no processing on tracks

25ms Release it s max Ratio and Threshold - EDIT: 22ms , i typed it wrong
400ms Release at moderate setting
attack it s fixed at 3ms

thanks for your attention
best

 

[richiyobs]

i m going to implement a relay Bypass into the 500 proto
for this occasion i m thinking to add also the Meter driver in this new board
the unit is developped this way:

-lower pcb is ch1 with signal and its own detector, the latter linked to ch2 detector

-upper pcb, ch2 , also contains the entire sidechain

so my question is:
where is better to take the psu for the bypass/meter board?

was thinking to use ch1 cause it has less components...
or is it better to redraw it and put relay-bypass on each channel and make a separate pcb for sidechain and meter?
doesn t matter which channel will supply the new PCB?

hope I was able to explain myself

thanks for your attention and support

best
richi

 

[richiyobs]

Just an attempt... The H shaped board will be installed between the 2 main boards...
Hope to be lucky...

 

[richiyobs]

went to another studio to get any new feedback and test
it s an old recording with no processing on tracks

https://drive.google.com/drive/folders/1jLQks-nO_CYzzkntATUWWW5L8YWpfgRN?usp=share_link
mambo1 forlder contains wrong file....sorry

thanks for your attention
best

 

[Mr. Brokenamp]

Sounds good

 

[flyingeyepro]

most impressive

 

[richiyobs]

Had time to get measurment
zip file it s .ods format
Slope pdf used REW with Tukey 0.25 tone burst
Thr pot at 12 o'clock, -20

when setting Thr to max, -28 , Ratio from 8:1 goes over 10.xx :1

best
richi