Small logos?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Junolab

New member
Joined
Oct 3, 2020
Messages
1
Is there any good place to buy some small metal plate logos for a new mic? Possibly custom-made, but if there are some cool shelf products which is cheaper then all good. Made a nice looking u47 close, but it just lacks something to show its the front
 
Here's how i do it. I cut 15x15mm aluminium plate 0.5mm thick. I print a logo on a 15x15mm transparent sticker paper. I bend the aluminium plate to a desired curve, place the sticker on the plate, glue it with super glue and pour transparent two component epoxy glue on the top of the whole thing. I go over the badge immediately with lighter flame to get rid of air bubbles, and that's it.

Here's a video of it
 
Last edited:

Latest posts

Back
Top