• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

[SOLD]FS: DIY-Racked MB-2 project and parts (nothing soldered)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

terroirmusic

New member
Joined
Aug 1, 2018
Messages
1
I've finally come to terms with the fact that I will never have the free time to actually do this project, so I'm passing it on  :)

Included is pretty much everything you need;  the rack enclosure, power transformer, PCBs, VU meter, and a whole whack of parts and hardware. I'm pretty sure I got everything from the BOM (including extras in many cases) but I don't have the time to go through everything, so there may be some small parts missing. But all the expensive stuff should be there.

I'd like to get 600$ Canadian for the whole batch, but feel free to make an offer.

I can only post 1 photo here, but let me know if you'd like to see others and I'll share them.
 

Attachments

  • Case angle.JPG
    Case angle.JPG
    596 KB · Views: 76

Latest posts

Back
Top