• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD: ioaudio BV.12 transformer for U67 clone

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

emrr

Well-known member
Joined
Apr 12, 2006
Messages
8,525
Location
NC, USA
Matches the Poctop PCB, though will need solid wire wrap extensions as the terminal pins come out the side rather than the bottom.  Can provide a diagram to anyone using it in another mounting scenario.  Note tape on sides holding lams as I don’t have any screws (M2?) that fit the holes.  I’ll run some string or a wire tie through them before shipping. 
These were roughly $250/shipped to US when they were available, they haven’t been for a long time. 
$125 shipped in US, more out of US.  SOLD
29453053298_eeba9a627c_z.jpg

28453912877_d3136811f9_z.jpg
 

Latest posts

Back
Top