• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jordanazor

Active member
GDIY Supporter
Joined
Nov 15, 2013
Messages
29
Just needs wiring up.

As pictured here: https://www.dropbox.com/s/hicenke65sgupms/IMG_1414.JPG?dl=0

Fully Populated main PCB
Fully Populated switch PCB
90% populated turbo PCB
Super sidechain PCB
Front Panel
Rear Panel
Pre drilled Case
Meter
Toroid power transformer
XLR connectors
Premade jumpers
Jumper headers and crimps
IEC connector

Repairs have been made to the switch PCB 10 pin connector. All pins have been tested for continuity. A fresh PCB can be picked up here for 13 bucks if you'd prefer it to be prettier: http://diy-tubes.com/index.php?route=product/product&product_id=158

$200AUD + Shipping.
125 Euro + Shipping
140USD + Shipping

(Only one, not all three :p)



 

Latest posts

Back
Top