Hi all, newbie here. I'm having some trouble finding info on the solder lugs/washers/eyelets/ring tongue used in center terminated Neumann capsules - does anyone know what material or size they should be?
I found these on Mouser:
https://www.mouser.com/ProductDetail/te-connectivity/31423/?qs=Z52uPhvi9Vhvz5TWRSTSqg%3D%3D&countrycode=US¤cycode=USD
From my understanding the center terminal screw size is something like an M1.6 or M1.4, so the #0 hole size should work, right? And is there anything wrong with using tin plated copper?
As always, many thanks for the help.
I found these on Mouser:
https://www.mouser.com/ProductDetail/te-connectivity/31423/?qs=Z52uPhvi9Vhvz5TWRSTSqg%3D%3D&countrycode=US¤cycode=USD
From my understanding the center terminal screw size is something like an M1.6 or M1.4, so the #0 hole size should work, right? And is there anything wrong with using tin plated copper?
As always, many thanks for the help.
