sourcing inductors for audio applications

[Humner]

I'm finding it hard to source inductors for audio EQ applications. My normal supplier has these style

http://au.element14.com/toko/10rb473k/inductor-47mh/dp/148876

Is that OK for audio use?

 

[gyraf]

Depends on what  circuit they go in. 

Toko 10RB-series are recommended for e.g. the G-Pultec filters.

Jakob E.

 

[Humner]

Thanks for that. That should be perfect then as it will be part of a passive EQ modification I'm doing on an existing console.

I will grab a couple and start breadboarding. 

 

[Humner]

I have an EQ question which I thought I would ask here quickly - I'm sure its an easy one for the gurus!

Can I change the order of the capacitor/inductor/resistor in an EQ circuit?

I normally see Wiper > capacitor > inductor > resistor. However If possible I want to go wiper > resistor > capacitor > inductor

 

[ruffrecords]

You can put the three of them in any order. It does not matter.

Ian

 

[Humner]

thanks. I have some awkward space requirements to contend with.