Sowter 9145 hookup?

[tk@halmi]

I just purchased a few Sowter 9145 transformers to support our sponsors. Upon visiting the Sowter website I could not find instructions on the assignment of the leads.
Could someone help out with that?

Thank You,
Tamas

 

[Bauman]

Tamas,

I have it connected here:
http://www.thediypill.phx.com.br/forumfiles/1272M_REV1.pdf

translation for colors (upside down because I was lazy to change the symbol, Joe Malone
have reported it is better connected this way):

AM = yellow
RX = violet
CZ = grey
AZ = blue
VM = red
MR = brown
BR = white
LR = orange

Does it help?


:sam:
Fabio

 

[Ethan]

Hi TK,

Just in case you didn't already have this information, the winding pinout sheet is here http://www.groupdiy.com/detail.aspx?ID=302
The numbers I believe coorespond with the neve pinout.

Fabio, the one that Joe tested was the older transformer, not the 9145. I'll ask Chae if he could test the 9145 and clarify.

 

[Bauman]

oops, true! This one is 9002... but maybe the 9145 is the same color coding, cos the internal difference is minimal... ?!?

:guinness:
Fabio

 

[tk@halmi]

Oh, duh! There is a datasheet posted.
Thank You Fabio and Ethan.