Stereo linking in 500 series racks and lunchboxes

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brian Roth

Well-known member
Joined
Aug 20, 2005
Messages
3,185
Location
Salina Kansas
Not sure where to post this, so it's here! here are a bunch of 500 racks sold these days. Some of the fancy ones have switching on the rear panel to engage the edge connectors' pin 6 links between modules. Some appear to have internal jumpers. Some racks MAY have pin sixes tied together in an odd/even slot configuration; ie, 1-2, 3-4, etc.

What I'm curious about is how handle a pair of 2-space wide compressors such as the AML 52F50 which takes up two slots. I need to check to see if pin 6 of both edge connectors are tied together in that module, however. It's a bit of an unknown. Just curious about the various possibilities.

Bri
 

Latest posts

Back
Top