Here are sweeps of the Cinemag CMMI-5C compared to the Crimson Audio CT-A10. This is Crimson's new copy of the UTC A-10.
These are hooked into my tube mic preamp. The graph rolls off at 30k, but that is due to the settings of my interface.
First comparison is wired 1:10. There is no load on the secondaries - straight to grid with a 1 meg grid leak resistor.
These are hooked into my tube mic preamp. The graph rolls off at 30k, but that is due to the settings of my interface.
First comparison is wired 1:10. There is no load on the secondaries - straight to grid with a 1 meg grid leak resistor.