Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I've now managed to make the first successful recording on my machine. Sounds surprisingly good given that the cards are not even in their shielded cases yet.


One thing I need to improve is the amplifier hiss. It's not horrific, but I'm sure the s/n ratio of the amp itself could be improved. I think I'll play around with lower value resistors in critical places, without losing too much gain. Will look more closely tomorrow and check whether it's the FET front-end stage or the opamp that follows it causing most of the hiss.


Will update soon again! Hopefully with some audio tests!


Back
Top