Testing tubes and transformers under real condition of mic amp

Help Support GroupDIY:

Dobrilo

Member
Joined
May 10, 2013
Messages
16
Location
Montenegro
Hi. I would like to make sim proto board for testing tubes and transformers under real condition of mic amp (U47) but I have no idea how to simulate input without capsule. I wanted to test for F.response, noise, etc, but I ned to establish input for low impedance source. Any ideas?
 

gyraf

Well-known member
Staff member
Moderator
Joined
Jun 4, 2004
Messages
10,215
Location
Aarhus, Denmark
Use a capacitor of the came capacitance as the capsule you want to simulate (iirc 72pF for KK47, 85pF for CK12), and inject signal through this...

Jakob E.
 

Dobrilo

Member
Joined
May 10, 2013
Messages
16
Location
Montenegro
gyraf said:
Use a capacitor of the came capacitance as the capsule you want to simulate (iirc 72pF for KK47, 85pF for CK12), and inject signal through this...

Jakob E.
Thanks Gyraf. So no need to add some resistor in series with signal generator?
 

Latest posts

Top