Tsyklon Labs - DAKA, Cosmo and soon Stockli knobs

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tankprofane

New member
Joined
May 2, 2014
Messages
1
Location
Pennsyltucky, USA
Hi everyone!

I've finally gotten a large enough stock of DAKA 4104, 4107 knobs along with Cosmo 7626 knobs to open a real online store. Also, I am getting ready to put in an order for a pile of Stockli knobs (2 sizes) and expect to have them by late September / early October. I can either provide individual knobs - or what I've been more of lately, is full finishing kits with knobs and panel lamps. In the case of the Drip v2 EQP-1As, I can also throw in the ribbon cable and pcb headers. Pretty much the stuff that usually isn't usually in the Mouser or Digikey BOMs that make our DIY builds look nice.

Long winded info here: http://tsyklon.com/diy/

My store can be found at: http://tsyklonlabs.storenvy.com/

In stock now:
- Traditional Pultec EQP-1A kits - $110USD shipped to the US/Puerto Rico
- Modern Pultec EQP-1A kits - $110USD shipped to the US/Puerto Rico
- Fairchild 670 kits - $90USD shipped to the US/Puerto Rico
- REDD.47 kits - $40USD shipped to the US/Puerto Rico

Typically, it's been another $15USD to ship kits to Canada, an extra $20USD to Europe and an additional $25USD to Australia. If there are other components that anyone thinks would be good to add to these kits, please let me know! I'm always happy to add more value to what I offer.

Thanks for reading!
-Frank
 
if you already asked...
it would be really nice if you could stock the Daka knobs (sorry don't know the number) with arrow on the collet and dot on the top of the knob... like the ones originally on the 670  ::)
 

Latest posts

Back
Top