VPR Alliance

[AudioHammer]

I am designing a mic preamp and compressor for the API 500 series rack format.

Does anyone have a copy of the VPR Alliance 500 Module Series Specification ?

 

[mikep]

[quote author="AudioHammer"]I am designing a mic preamp and compressor for the API 500 series rack format.

Does anyone have a copy of the VPR Alliance 500 Module Series Specification ?[/quote]

I have emailled them several times regarding the info packet and never got a response. I would like a copy too if anyone is willing to share.

 

[chrissugar]

A while ago I found the files posted at another forum, so I uploaded them now to our "groupdiy at gmail dot com" address.
There is an electrical and a mechanical spec file.
Enjoy.

chrissugar

 

[AudioHammer]

Thanks for the info.

Is there a mechanical spec for designs using a full enclosure?

 

[pucho812]

what is the information for that gdiy mail again?

 

[Ian MacGregor]

[quote author="AudioHammer"]Thanks for the info.

Is there a mechanical spec for designs using a full enclosure?[/quote]

No, there is not a standard enclosure spec. Most that I have seen (or designed) have been 16GA Zinc Plated (or painted) cold rolled steel (CRS). There are quite a few modules that do not have a full enclosure and instead consist of an "L" bracket and faceplate, leaving the PCB exposed (but not really since it is installed in the rack.[/img]

 

[3nity]

what is the information for that gdiy mail again?

Meta.